For Better Performance Please Use Chrome or Firefox Web Browser

Journal Publications

  1. Masoomi, Mahmood, S. Reza Ghaffarian, and Naser Mohammadi. "The Effect of Processing Conditions and Matrix Type on the Interface of Polyethylene-fibre/Polyethylene-matrix Composites." Iranian Polymer Journal 13 (2004): 381-388.
  2. Masoomi, M., and B. Esteki. "UV STABILIZATION OF POLYOLEFINES: AN OVERVIEW." (2012): 36-47.
  3. Asgari, Mohammad, and Mahmood Masoomi. "Thermal and impact study of PP/PET fibre composites compatibilized with glycidyl methacrylate and maleic anhydride." Composites Part B: Engineering 43.3 (2012): 1164-1170.
  4. Daneshvar, Mohsen, and Mahmood Masoomi. "Synthesis and application of MDPE‐g‐GMA as a reactive compatibilizer in blends of MDPE/PET and MDPE/PA6." Journal of Applied Polymer Science 124.3 (2012): 2048-2054.
  5. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Effect of corn starch content in thermoplastic starch/low‐density polyethylene blends on their mechanical and flow properties." Journal of Applied Polymer Science 126.S1 (2012).
  6. Daneshvar, M., et al. "Supercritical carbon dioxide grafting of glycidyl methacrylate onto medium density polyethylene and purification of residual monomer and initiator." The Journal of Supercritical Fluids 70 (2012): 119-125.
  7. Khalili, Shahla, Mahmood Masoomi, and Rohollah Bagheri. "The effect of organo-modified montmorillonite on mechanical and barrier properties of linear low-density polyethylene/low-density polyethylene blend films." Journal of Plastic Film & Sheeting 29.1 (2013): 39-55.
  8. SABETZADEH, MARYAM, et al. "PREPARATION AND STUDY ON THE PROPERTIES OF LDPE-THERMOPLASTIC STARCH BLENDS; PART II: WATER ABSORPTION BEHAVIOR." (2013): 25-30.
  9. Heydari, Maryam, et al. "Effect of cross‐linking time on the thermal and mechanical properties and pervaporation performance of poly (vinyl alcohol) membrane cross‐linked with fumaric acid used for dehydration of isopropanol." Journal of Applied Polymer Science128.3 (2013): 1640-1651.
  10. Broujerdi, Mohsen Sadeghi, Mahmood Masoomi, and Mohammad Asgari. "Interfacial improvement and mechanical properties of epoxy resin/ultra-high molecular weight polyethylene fibre composites compatibilized with glycidyl methacrylate." Journal of Reinforced Plastics and Composites 32.22 (2013): 1675-1684.
  11. HAJIBABA, A., and M. MASOOMI. "RELATIONSHIP BETWEEN MORPHOLOGY AND RHEOLOGY IN IMMISCIBLE POLYMER BLENDS." (2014): 68-78.
  12. Hesami, Mahdis, Rouhollah Bagheri, and Mahmood Masoomi. "Flammability and thermal properties of epoxy/glass/MWNT composites." Journal of Applied Polymer Science 131.4 (2014).
  13. Hesami, Mahdis, Rouhollah Bagheri, and Mahmood Masoomi. "Combination effects of carbon nanotubes, MMT and phosphorus flame retardant on fire and thermal resistance of fiber-reinforced epoxy composites." Iranian Polymer Journal 23.6 (2014): 469-476.
  14. Masoomi, Mahmood, et al. "Effect of OMMTs on flame retardancy and thermal stability of poly (ethylene‐co‐vinyl acetate)/LDPE/magnesium hydroxide composites." Journal of Applied Polymer Science 131.13 (2014).
  15. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Effect of organomodified montmorillonite concentration on tensile and flow properties of low-density polyethylene–thermoplastic corn starch blends." Journal of Thermoplastic Composite Materials 27.8 (2014): 1022-1036.
  16. Dayarian, Shima, et al. "Physico-mechanical properties of films of chitosan, carboxymethyl chitosan, and their blends." Journal of Polymers and the Environment 22.3 (2014): 409-416.
  17. Gholamzad, Elahe, Keikhosro Karimi, and Mahmood Masoomi. "Effective conversion of waste polyester–cotton textile to ethanol and recovery of polyester by alkaline pretreatment." Chemical Engineering Journal 253 (2014): 40-45.
  18. Masoomi, Mahmood, Masoud Tavangar, and Seyed Mohammad Reza Razavi. "Preparation and investigation of mechanical and antibacterial properties of poly (ethylene terephthalate)/chitosan blend." RSC Advances 5.96 (2015): 79200-79206.
  19. Asgari, Mohammad, and Mahmood Masoomi. "Tensile and flexural properties of polypropylene/short poly (ethylene terephthalate) fibre composites compatibilized with glycidyl methacrylate and maleic anhydride." Journal of Thermoplastic Composite Materials 28.3 (2015): 357-371.
  20. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Study on ternary low density polyethylene/linear low density polyethylene/thermoplastic starch blend films." Carbohydrate polymers 119 (2015): 126-133.
  21. Ahmadi, Mojtaba, Mahmood Masoomi, and Somayeh Safi. "Mechanical property characterization of carbon nanofiber/epoxy nanocomposites reinforced by GMA-grafted UHMWPE fibers." Composites Part B: Engineering 83 (2015): 43-49.
  22. Safi, Somayeh, Ali Zadhoush, and Mahmood Masoomi. "Effects of chemical surface pretreatment on tensile properties of a single glass fiber and the glass fiber reinforced epoxy composite." Polymer Composites 37.1 (2016): 91-100.
  23. Mohammadalipour, Mohammad, et al. "Interfacial shear strength characterization of GMA-grafted UHMWPE fiber/epoxy/nano clay hybrid nanocomposite materials." RSC Advances 6.48 (2016): 41793-41799.
  24. Hajibaba, Armin, Mahmood Masoomi, and Hossein Nazockdast. "The role of hydrophilic organoclay in morphology development of poly (butylene terephthalate)/polypropylene blends." High Performance Polymers 28.1 (2016): 85-95.
  25. Hajibaba, Armin, Mahmood Masoomi, and Hossein Nazockdast. "Compatibilization effectiveness of maleated polypropylene compared to organoclay in PBT/PP blends." Iranian Polymer Journal 25.2 (2016): 157-167.
  26. Shahzamani, Mahnaz, Rouhollah Bagheri, and Mahmood Masoomi. "Surface functionalization of rubber latex nanoparticles with sulfidosilane moieties." Journal of Applied Polymer Science133.15 (2016).
  27. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Effect of nanoclay on the properties of low density polyethylene/linear low density polyethylene/thermoplastic starch blend films." Carbohydrate polymers 141 (2016): 75-81.
  28. Ahmadi, Mojtaba, et al. "Interfacial evaluation of epoxy/carbon nanofiber nanocomposite reinforced with glycidyl methacrylate treated UHMWPE fiber." Journal of Applied Polymer Science133.31 (2016).
  29. Shahzamani, Mahnaz, et al. "Preparation and characterization of hybrid aerogels from novolac and hydroxyl-terminated polybutadiene." Journal of materials science 51.17 (2016): 7861-7873.
  30. Kamalipour, Jamshid, et al. "Preparation and release study of Triclosan in polyethylene/Triclosan anti-bacterial blend." Colloids and Surfaces B: Biointerfaces 145 (2016): 891-898.
  31. Ahmadi, Mojtaba, et al. "Synergistic effect of MWCNTs functionalization on interfacial and mechanical properties of multi-scale UHMWPE fibre reinforced epoxy composites." Composites Science and Technology 134 (2016): 1-11.
  32. Shahzamani, Mahnaz, Rouhollah Bagheri, and Mahmood Masoomi. "Synthesis of silica-polybutadiene hybrid aerogels: The effects of reaction conditions on physical and mechanical properties." Journal of Non-Crystalline Solids 452 (2016): 325-335.
  33. Adloo, Ali, et al. "High performance polymeric bipolar plate based on polypropylene/graphite/graphene/nano-carbon black composites for PEM fuel cells." Renewable Energy 99 (2016): 867-874.
  34. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Effect of Oxidized Starch on Morphology, Rheological and Tensile Properties of Low-Density Polyethylene/Linear Low-Density Polyethylene/Thermoplastic Oxidized Starch Blends." Journal of Polymers and the Environment (2017): 1-8.
  35. Shahzamani, Mahnaz, et al. "Effect of drying method on the structure and porous texture of silica-polybutadiene hybrid gels: Supercritical vs. ambient pressure drying." Journal of Non-Crystalline Solids 460 (2017): 119-124.
  36. Sabetzadeh, Maryam, Rouhollah Bagheri, and Mahmood Masoomi. "Morphology and rheological properties of compatibilized low‐density polyethylene/linear low‐density polyethylene/thermoplastic starch blends." Journal of Applied Polymer Science 134.16 (2017).
  37. Hajibaba, Armin, Mahmood Masoomi, and Hossein Nazockdast. "Morphology and rheological behavior of poly (butylene terephthalate)/polypropylene blends filled by two types of organoclays." Journal of Thermoplastic Composite Materials 30.5 (2017): 646-661.
  38. Safi, Somayeh, Ali Zadhoush, and Mahmood Masoomi. "Evaluation of interfacial properties of the silane blend sized glass fiber–epoxy composite by the microdroplet test." Journal of Composite Materials 51.11 (2017): 1573-1581.
  39. Safaei, Ali, Mahmood Masoomi, and Seyed Mohammad Reza Razavi. "In-situ microfibrillar PP–PA6 composites: rheological, morphological and mechanical properties." Bulletin of Materials Science 40.5 (2017): 971-982.
  40. Seyed Mohammad Razavi, Junho Oh, Soumyadip Sett, Lezhou Feng, Xiao Yan, Muhammad Jahidul Hoque, Aihua Liu, Richard T. Haasch, Mahmood Masoomi, Rouhollah Bagheri, and Nenad Miljkovic. "Superhydrophobic Surfaces Made from Naturally Derived Hydrophobic Materials" ACS Sustainable Chemistry & Engineering                                                  DOI: 10.1021/acssuschemeng.7b02424

تحت نظارت وف ایرانی